Arrow QL Series Gr.1 Leverset

Arrow’s QL Series Grade 1 cylindrical lockset featuring a freewheeling lever for abuse resistance and a 10 year warranty.  The QL Lever features a two screw install for quick and easy installation.
Certification

• ANSI/BHMA A156.2, Series 4000, Grade 1
• Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors
• Federal Specification FF-H-106C
• ANSI A117.1 Accessibility Code
• California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface
  
  

ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9

Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.

Features

Door Preparation: Requires standard 2-1/8" (53.97mm) bore through door.
Backset: 2-3/4" (69.85mm)
Door Thickness: Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors standard.
Latch: Stainless Steel 1/2" (12.7mm) throw, UL Listed, guarded latchbolt
on all locking functions
Latch Front: 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
Exposed Trim: QL Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length. QL Roses are wrought brass 3-11/32" (84.8mm) diameter. Total projection from face of door is 2 17/32" ( 4.5mm).
Freewheeling Lever
Warranty: Ten YearWarranty
Handing: Non-handed
Packaging: 6 per case
Strike: 4-7/8" ANSI (123.83mm)
Cylinder: Solid brass 6 pin, Schlage CS keyway, keyed different
Keys: 2 brass keys
Finish: US3,US4,US10,US10B,US26,US26D. Consult factory for the availability of other non-listed finishes